Channel Set Up Again; Deleting (Or Adding) Channel - Emerson EWC0903 Owner's Manual

the number(s) that appear on the
screen. These are the auto clock
station(s) in your area. See item
4 below.
•
If no number(s) appear on the TV screen, there are
no stations in your area which contain the Auto
Clock signal. Auto Clock Setting is not possible.
Please use Manual Clock Setting on page 11.
Press the MENU button to exit the screen.
NOTE: During Auto Clock CH Search, the picture
may be distorted. This is normal.
4
Enter the channel number that contains the
Automatic Clock Setting Signal
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L
button to select "SETTING
CLOCK".
Press the F.FWD/B button to enter
"SETTING CLOCK" menu.
Press the STOP/L button to select
"AUTO CLOCK CH".
Press the F.FWD/B or REW/s
buttons until you locate Auto
Clock Set station number. See item
3 above.
Press the MENU button to exit the screen.
5
Turn off the TV/VCR
Once the TV/VCR is turned off , it will periodically
check and set the correct date and time.
Make sure ...
•
Press the POWER button to turn on the TV/VCR.
1
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "CHANNEL SET
UP".
Then, press the F.FWD/B button.
2
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
Press the PLAY/K or STOP/L but-
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
ton to point to "AUTO PRESET".
LANGUAGE [ENGLISH]
ZERO RETURN
TIME SEARCH
Then, press the F.FWD/B button.
The tuner scans and memorizes all
the active channels in your area.
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
B AUTO CLOCK CH [ 45]
3
MANUAL CLOCK SET
D.S.T. [OFF]
The tuner stops on the lowest memorized channel.
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you
can add the deleted channel into the memory again.)
1
Press the MENU button on the
remote control. Then press the
PLAY/K or STOP/L button to
point to "CHANNEL SET UP".
Then, press the F.FWD/B button.
2
Press the PLAY/K or STOP/L but-
ton to point to "ADD/DELETE
CH".
Press the F.FWD/B button.
3
Press the PLAY/K or STOP/L but-
ton until your desired channel num-
ber appears. (You can also use the
number buttons or the CHANNEL
K/L button to enter it) (Example:
CH8)
- 13 -

CHANNEL SET UP AGAIN

Select "CHANNEL SET UP"
Begin auto preset
After scanning
DELETING (OR ADDING)
CHANNEL
Select "CHANNEL SET UP"
Select "ADD/DELETE CH"
Enter the desired channel number
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
B CHANNEL SET UP
USER'S SET UP
LANGUAGE [ENGLISH]
ZERO RETURN
TIME SEARCH
– CHANNEL SET UP –
ADD / DELETE CH (TV)
B AUTO PRESET
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
B CHANNEL SET UP
USER'S SET UP
LANGUAGE [ENGLISH]
ZERO RETURN
TIME SEARCH
– CHANNEL SET UP –
B ADD / DELETE CH (TV)
AUTO PRESET
08
ADD / DELETE
EN
9J27