Channel Set Up Again; Deleting (Or Adding) Channel - Emerson EWC0902 Owner's Manual

5
Select the year
Press the PLAY/K or STOP/L but-
ton until your desired year appears.
(Example: 2002)
Then, press the F.FWD/B button.
6
Select the hour
Press the PLAY/K or STOP/L but-
ton until your desired hour appears.
(Example: 5, PM)
Then, press the F.FWD/B button.
7
Select the minute
Press the PLAY/K or STOP/L but-
ton until the desired minute appears.
(Example: 40)
8
Start the clock
Press the MENU button on the
remote control.
Although seconds are not displayed,
they begin counting from 00 when
you press the MENU button on the
remote control. Use this feature to
synchronize the clock with the correct time.
NOTE:
When unplugging the AC cord or if there is a power
failure for more than 30 seconds, you may have to
reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock,
1)Follow steps [1] and [2].
2)Select where you want to change using the
F.FWD/B or REW/s button.
3)Enter correct numbers using the PLAY/K or
STOP/L button.
4)Press the MENU button on the remote control to
start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on
your cable system, select "AUTO CLOCK" and press
the F.FWD/B or REW/s button to turn [OFF] this
function. Then you can manually adjust the clock.
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 1 WED 2 0 0 2
Make sure ...
HOUR MINUTE
•
Press the POWER button to turn on the TV/VCR.
– – : – – – –
1
Select "CHANNEL SET UP"
– MANUAL CLOCK SET –
Press the MENU button on the
MONTH DAY YEAR
remote control.
0 5 / 0 1 WED 2 0 0 2
Press the PLAY/K or STOP/L but-
HOUR MINUTE
ton to point to "CHANNEL SET
0 5 : – – PM
UP".
Then, press the F.FWD/B button.
– MANUAL CLOCK SET –
MONTH DAY YEAR
2
Begin auto preset
0 5 / 0 1 WED 2 0 0 2
Press the PLAY/K or STOP/L but-
HOUR MINUTE
0 5 : 4 0 PM
ton to point to "AUTO PRESET".
Then, press the F.FWD/B button.
The tuner scans and memorizes all
the active channels in your area.
5:40 PM
3
After scanning
The tuner stops on the lowest memorized channel.
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you
can add the deleted channel into the memory again.)
1
Select "CHANNEL SET UP"
Press the MENU button on the
remote control. Then press the
PLAY/K or STOP/L button to
point to "CHANNEL SET UP".
Then, press the F.FWD/B button.
2
Select "ADD/DELETE CH"
Press the PLAY/K or STOP/L but-
ton to point to "ADD/DELETE
CH".
Press the F.FWD/B button.
3
Enter the desired channel number
Press the PLAY/K or STOP/L but-
ton until your desired channel num-
ber appears. (You can also use the
number buttons or the CHANNEL
K/L button to enter it) (Example:
CH8)
- 13 -

CHANNEL SET UP AGAIN

DELETING (OR ADDING)
CHANNEL
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
B CHANNEL SET UP
USER'S SET UP
LANGUAGE [ENGLISH]
ZERO RETURN
TIME SEARCH
– CHANNEL SET UP –
ADD / DELETE CH (TV)
B AUTO PRESET
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
B CHANNEL SET UP
USER'S SET UP
LANGUAGE [ENGLISH]
ZERO RETURN
TIME SEARCH
– CHANNEL SET UP –
B ADD / DELETE CH (TV)
AUTO PRESET
08
ADD / DELETE
EN
9J27