Clock Set Up (Auto / Manual); To Change Clock Setting - Emerson EWC0903 Owner's Manual

3
Select the month
Press the PLAY/K or STOP/L but-
ton until your desired month
appears. (Example: May → 05)
Then, press the F.FWD/B button.
4
Select the day
Press the PLAY/K or STOP/L but-
ton until your desired day appears.
(Example: 6th → 06)
Then, press the F.FWD/B button.
5
Select the year
Press the PLAY/K or STOP/L but-
ton until your desired year appears.
(Example: 2003)
Then, press the F.FWD/B button.
6
Select the hour
Press the PLAY/K or STOP/L but-
ton until your desired hour appears.
(Example: 5, PM)
Then, press the F.FWD/B button.
7
Select the minute
Press the PLAY/K or STOP/L but-
ton until the desired minute
appears. (Example: 40)
8
Start the clock
Press the MENU button on the
remote control.
Although seconds are not dis-
played, they begin counting from
00 when you press the MENU button on the remote
control. Use this feature to synchronize the clock
with the correct time.
NOTE:
When unplugging the AC cord or if there is a power
failure for more than 3 seconds, you may have to
reset the clock.

TO CHANGE CLOCK SETTING

If you want to change the clock,
1)Follow steps [1] and [2].
2)Select where you want to change using the
F.FWD/B or REW/s button.
3)Enter correct numbers using the PLAY/K or
STOP/L button.
4)Press the MENU button on the remote control to
start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on
– MANUAL CLOCK SET – your cable system, select "AUTO CLOCK" and
press the F.FWD/B or REW/s button to turn [OFF]
MONTH DAY YEAR
0 5 / – – – – – – – – –
this function. Then you can manually adjust the
HOUR MINUTE clock.
– – : – – – –
AUTOMATIC CLOCK SETTING
– MANUAL CLOCK SET –
Make sure ...
MONTH DAY YEAR
•
The TV/VCR is turned on.
0 5 / 0 6 – – – – – – –
•
Confirm the TV/VCR is receiving a RF (Radio
HOUR MINUTE
Frequency) signal from either an antenna or cable
– – : – – – –
system connection using the ANT IN jack on the
rear of the TV/VCR.
NOTE:
– MANUAL CLOCK SET –
•
If a cable converter box is being used, make sure it
MONTH DAY YEAR
0 5 / 0 6 TUE 2 0 0 3 is powered on.
•
HOUR MINUTE
You must use the TV/VCR remote control to per-
– – : – – – –
form the clock setting procedure.
•
If the TV/VCR is connected directly to a cable
converter box or satellite box, the local PBS station
– MANUAL CLOCK SET –
must be selected on the cable box itself, and the
MONTH DAY YEAR
TV/VCR must be set to the output channel of the
0 5 / 0 6 TUE 2 0 0 3
cable converter box or satellite box (usually chan-
HOUR MINUTE
nel 3 or 4), to be able to set up or correct the clock
0 5 : – – PM
automatically.
– MANUAL CLOCK SET –
1
Select "SETTING CLOCK"
MONTH DAY YEAR
Press the MENU button on the
0 5 / 0 6 TUE 2 0 0 3
remote control.
HOUR MINUTE
Press the PLAY/K or STOP/L but-
0 5 : 4 0 PM
ton to select "SETTING CLOCK".
Press the F.FWD/B button to enter
"SETTING CLOCK" menu.
5:40 PM
2
Set "AUTO CLOCK" to [ON]
Press the F.FWD/B button until
AUTO CLOCK [ON] appears.
3
Begin "AUTO CLOCK CH SEARCH"
Press the STOP/L button to select
"AUTO CLOCK CH SEARCH".
Press the F.FWD/B button.
•
The TV/VCR is now searching
for the station which contain the
auto clock set signal. The search
for a signal may take up to 20
seconds per channel.
•
"_ _" appears at the lower left of
the screen when the search has
ended.
•
Auto Clock station- write down
- 12 -
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
LANGUAGE [ENGLISH]
ZERO RETURN
TIME SEARCH
– SETTING CLOCK –
B AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T. [OFF]
– SETTING CLOCK –
AUTO CLOCK [ON]
B AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T. [OFF]
– AUTO CLOCK CH SEARCH –
08 10 13
_ _
EN
9J27