Ai Tweaker Menu; Ai Overclock Tuner - Asus P5Q Premium - Motherboard - ATX User Manual

3.4

Ai Tweaker menu

The Ai Tweaker menu items allow you to configure overclocking-related items.
Take caution when changing the settings of the Ai Tweaker menu items.
Incorrect field values can cause the system to malfunction.
The default values of the following items vary depending on the CPU and
memory modules you install on the motherboard.
Main Ai Tweaker Advanced Power Boot Tools Exit
Configure System Performance Settings
Ai Overclock Tuner
CPU Ratio Setting
FSB Strap to North Bridge
DRAM Frequency
DRAM CLK Skew on Channel A1 [Auto]
DRAM CLK Skew on Channel A2 [Auto]
DRAM CLK Skew on Channel B1 [Auto]
DRAM CLK Skew on Channel B2 [Auto]
DRAM Timing Control
1st Information : 4-4-4-15-3-36-5-3
2nd Information : 8-3-5-4-6-4-6
3rd Information : 12-5-1-4-4
DRAM Static Read Control
DRAM Read Training
MEM. OC Charger
Ai Clock Twister
Ai Transaction Booster
C/P : B1 B2 B3 B4
Scroll down to display the following items:
LVL : 11 11 11 11
******** Please key in numbers directly! ********
CPU Voltage
CPU GTL Voltage Reference(0/2) [Auto]
CPU GTL Voltage Reference(1/3) [Auto]
CPU PLL Voltage
FSB Termination Voltage
DRAM Voltage
NB Voltage
NB GTL Reference
SB Voltage
PCIE SATA Voltage
*************************************************
Load-Line Calibration
CPU Spread Spectrum
PCIE Spread Spectrum
CPU Clock Skew
NB Clock Skew
3.4.1 Ai Overclock Tuner [Auto]
Allows selection of CPU overclocking options to achieve desired CPU internal
frequency. Select either one of the preset overclocking configuration options:
Manual
Auto
3-16
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Allows you to individually set overclocking parameters.
Loads the optimal settings for the system.
BIOS SETUP UTILITY
Options
Manual
Auto
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 3: BIOS setup