Recovering Bios Data - Intel D815EGEWLU - P3 Socket 370 MicroATX Motherboard Specification

Intel Desktop Board D815EGEW Technical Product Specification

3.7 Recovering BIOS Data

Some types of failure can destroy the BIOS. For example, the data can be lost if a power outage
occurs while the BIOS is being updated in flash memory. The BIOS can be recovered from a
diskette using the BIOS recovery mode. When recovering the BIOS, be aware of the following:
•
Because of the small amount of code available in the non-erasable boot block area, there is no
video support. You can only monitor this procedure by listening to the speaker or looking at
the diskette drive LED.
•
The recovery process may take several minutes; larger BIOS flash memory devices require
more time.
•
Two beeps and the end of activity in the diskette drive indicate successful BIOS recovery.
•
A series of continuous beeps indicates a failed BIOS recovery.
To create a BIOS recovery diskette, a bootable diskette must be created and the BIOS update files
copied to it. BIOS upgrades and the Intel Flash Memory Upgrade utility are available from Intel
Customer Support through the Intel World Wide Web site.
✏
NOTE
If the computer is configured to boot from an LS-120 diskette (in the Setup program's Removable
Devices submenu), the BIOS recovery diskette must be a standard 1.44 MB diskette not a 120 MB
diskette.
For information about
The BIOS recovery mode jumper settings
The Boot menu in the BIOS Setup program
Contacting Intel customer support
80
Refer to
Table 45, page 63
Section 4.7, page 103
Section 1.2, page 16