Connecting to the Front Panel USB 2.0 Headers
Before connecting to the USB 2.0 headers, observe the precautions in "Before You
Begin" on page 23. See Figure 11, B and E for the location of the USB 2.0 headers.
Table 7 and Table 8 show the pin assignments for the headers.
The brown USB header (Figure 11, B) supports a single USB port while the black USB
header (Figure 11, E) supports two USB ports. The single USB port header is designed
to support a Flash Memory Drive such as the Intel Z-U130 USB Solid-State Drive (or
compatible device). Refer to "Installing an Intel
Compatible Device" on page 32 for more information.
Table 7. Front Panel USB Header
Pin
Signal Name
1
+5 VDC
3
D-
5
D+
7
Ground
9
KEY (no pin)
Table 8.
Front Panel USB Header with Intel Z-U130 USB Solid-State Drive or
Compatible Device Support
Pin
Signal Name
1
+5 VDC
3
D-
5
D+
7
Ground
9
KEY (no pin)
Connecting to the Piezoelectric Speaker Header
Figure 11, C shows the location of the piezoelectric speaker header. Table 9 shows the
pin assignments for the piezoelectric speaker header.
Table 9. Piezoelectric Speaker Header
Pin
Signal Name
1
+ 5 VDC
2
Key (no pin)
3
Key (no pin)
4
SPKR
Installing and Replacing Desktop Board Components
®
Z-U130 USB Solid-State Drive or
Pin
Signal Name
2
+5 VDC
4
D-
6
D+
8
Ground
10
No Connect
Pin
Signal Name
2
No Connect
4
No Connect
6
No Connect
8
No Connect
10
LED#
35