Wake-Up Devices And Events - Intel D2500HN Specification

1.11.1.2

Wake-up Devices and Events

Table 8 lists the devices or specific events that can wake the computer from specific
states.
Table 9. Wake-up Devices and Events
Devices/events that wake up the system...
Power switch
RTC alarm
LAN
USB
PME# signal
Serial port
PS/2 devices
Notes:
1. S4 implies operating system support only.
2. USB ports must be turned off during S4/S5 states.
3. PS/2 wake from S5 should have a selection in the BIOS to enable wake from a combination key
(Alt + Print Screen) or the keyboard power button.
NOTE
The use of these wake-up events from an ACPI state requires an operating system that
provides full ACPI support. In addition, software, drivers, and peripherals must fully
support ACPI wake events.
...from this sleep state
Note 1)
(
S3, S4, S5
(Note 1)
S3, S4, S5
(Note 1)
S3, S4, S5
(Note 2)
S3
(Note 1)
S3, S4, S5
S3
(Notes 1 and 3)
S3, S4, S5
Product Description
31