White Rodgers 90 SERIES 1F95-391 Operating Instructions Manual page 4

LARGE LIGHTED (LCD) DISPLAY
The thermostat display alternately
shows the current time and the current
temperature on the left side. The
display also shows the temperature
you have programmed or set on the
right side of your screen.
Display system mode (OFF,
1
AUTO, HOLD, VACA or HUMD).
During programming displays the time
period (MOR, DAY, EVE, NHT)
being programmed. In the configura-
tion menu, the menu item name is
1 2
CHECK BATTERY
MON TUE WED THU FRI SAT SUN
7 6
shown, one word at a time (PRGM
MODE, EMR, COOL FAN DELA
OFF, etc.).
CHECK STAT appears when the
2
thermostat detects certain problems
within itself. CHECK SYSTEM
appears when the themostat detects
certain problems in the heating/cooling
or humidity system.
Indicates the length of time
3
remaining in a temporary hold
condition. Also indicates the length of
time remaining in VACATION mode.
3 4 1
CHECK BATTERY
HRS FAN AUTO
HEAT
F
AM
MON TUE WED THU FRI SAT SUN
5
HRS FAN AUTO
HEAT
F
8
AM
2
Displays FAN ON when the fan is
4
operating continuously. Displays FAN
AUTO when the fan cycles with the
heating or cooling system.
Displays the setpoint temperature.
5
In HUMD mode, shows humidity
setpoint.
Alternately displays room
6
temperature and time of day. In
HUMD mode, shows actual humidity.
Shows the current day of the week.
7
When programming, shows the day(s)
being programmed.
The word HEAT or COOL will
8
appear above or below the setpoint if
area is needed to display other
1
information.