White Rodgers 90 SERIES 1F95-391 Operating Instructions Manual page 14

PROGRAMMING
MANUAL OPERATION
(Bypassing the Program)
Your White-Rodgers 90 Series
thermostat can be used to control
temperature manually (without
programming). For manual operation,
to select HEAT or
press
SYSTEM
COOL, then press PROGRAM
Use or
HOLD .
temperature as desired.
PROGRAMMED OPERATION
Planning Your Program
The sample schedule (pages 14 & 15)
shows the factory-installed programs
for heating and cooling. The heating
and cooling programs are separate,
and must be programmed individually.
To use the factory program, set the
clock and press PROGRAM
with the thermostat set to Heat, Cool,
or Auto. Fill out the blank schedules
(pages 16 & 17) with the time and
temperatures you want in your
program. Fill in every space for your
program.The same temperature can be
repeated more than once if you do not
want the temperature to change over
several time periods. This is useful for
to set the
homes or businesses that are occupied
all day and only want a setback
temperature at night.
Entering Your Program
To Set the Clock:
1. Press PROGRAM
2. Press SET
show the hour. Use TIME
TIME
BACK
and AM/PM designation.
RUN
.
RUN
. The display will
TIME
or
FWD
to set to the current hour
12
3. Press SET again. The display
TIME
will show minutes. Use TIME
or TIME to set to the current
BACK
minutes.
4. Press PROGRAM
RUN
To Set the Day:
5. Press SET . The display will
DAY
indicate a day of the week. Use TIME
or TIME to set to the
FWD BACK
current day of the week.
6. Press PROGRAM
RUN
To Set the Program:
7. Press the button to select
SYSTEM
HEAT (for heating program) or COOL
(for cooling program).
8. Press PROGRAM
VIEW
The display will show MOR, the
settings for time and temperature and
MON.
FWD
.
.
one time.