OCX 8800
Figure 7-14. COe Sensor
Parts Alignment
7-18
2. Install and tighten eductor (6) in eductor holder (14).
3. Install and tighten elbow (12) on eductor (6). Male port of elbow must
point up and be in line with long axis of eductor.
4. Apply anti-seize compound to the external pipe threads of eductor
holder (14).
5. Install and tighten eductor holder (14) in sensor housing (7). Align
eductor with matchmarks, as shown in Figure 7-14.
Eductor Flat
Matchmark
Instruction Manual
Straightedge
IM-106-880, Rev 1.0
January 2007