Electrolux EWS 105410 A User Manual page 6

6 electrolux
2
DISPLAY
A B
The display shows:
A • The delay start
When you press the delay start button,
the display shows the delay start time.
B • The default spin speed of the pro-
gramme.
• 'No Spin' (00).
C • The display symbols.
The symbols appear on the display when
the related function is set.
D • The programme time
• Alarm codes
If the appliance has a malfunction, the
display shows alarm codes. Refer to
'Troubleshooting' chapter.
• End
It comes on when the programme is
completed.
START BUTTON
Press this button to start a programme.
EASY IRON BUTTON
Press this button to prevent the creases in
the fabrics. When you press this button, the
appliance decrease the intensity of the
washing phase and spin speed.
Automatically, the spin speed is set to 500
rpm.
Set this function to iron the laundry easily
and quickly.
EXTRA RINSE BUTTON
Press this button to add rinsing phases to a
programme.
Use this function for persons allergic to de-
tergents and in areas where the water is
soft.
C D
3
4
5
RINSE HOLD BUTTON
Press this button to activate the 'Rinse
Hold' function.
Set this function to prevent fabric creases.
The appliance does not drain the water
when the programme is completed.
To drain the water refer to 'At the end of the
programme'.
PREWASH BUTTON
Press this button to add a prewash phase
at 40° C before the washing programme.
We recommend that you use this function
when you have laundry with a high level of
soil.
The set of this function increases the
programme duration.
8
SPIN BUTTON
Press this button to:
• Decrease the maximum speed of the
spin phase when you set a programme.
The display shows only the spin
speeds available with the set pro-
gramme.
• Deactivate the spin phase.
The spin phase is off.
DELAY START BUTTON
Press this button to delay the start of a pro-
gramme from 1 hour to 16 hours.
Press this button again and again to set the
correct delay start. The symbol h flashes
until the start of the washing programme
while the indicator of the Start is off.
When the programme starts the indicator of
the Start comes on.
30 minutes after the set of the delay
start, the light display comes off while
the symbols of the functions set stay
on.
Press one of the buttons or turn the
programme knob to activate again the
light display.
6
7
9