Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Electrolux EWS 105410 A
Summary of Contents for Electrolux EWS 105410 A
- Page 1 user manual Washing Machine EWS 105410 A EWS 125410 A...
-
Page 2: Table Of Contents
2 electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS Safety information Hints and tips Environment concerns Before first use Technical information Daily use Product description Care and cleaning Control panel Troubleshooting Programmes Installation Subject to change without notice... -
Page 3: Environment Concerns
3 • Do not install and connect a damaged Electrical connection appliance. • Make sure that the appliance is earthed. • Make sure to remove all packaging and • Make sure that the electrical information transport bolts. on the rating plate agrees with the power •... -
Page 4: Technical Information
4 electrolux TECHNICAL INFORMATION Dimensions Width / Height / Depth 600 / 850 / 480 mm Electrical connection: Voltage 220-240 V Overall power 2100 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid particles and moisture... -
Page 5: Control Panel
5 ACCESSORIES Large plastic caps To close the holes on the rear side of the cabinet after the removal of the transit bolts. Plastic hose guide To connect the drain hose on the edge of a sink. Small plastic caps To attach the protection cover to the bottom of the appliance. - Page 6 6 electrolux DISPLAY RINSE HOLD BUTTON Press this button to activate the 'Rinse Hold' function. Set this function to prevent fabric creases. The appliance does not drain the water when the programme is completed. To drain the water refer to ‘At the end of the programme’.
-
Page 7: Programmes
7 PROGRAMMES Programme Type of load and soil Programme Possible Temperature Weight of load phases functions White cotton with heavy soil. This Wash Bawełniane programmes add also the phase Rinses 90 – 75 °C of hygiene to the laundry. -
Page 8: Consumption Values
8 electrolux Programme Type of load and soil Programme Possible Temperature Weight of load phases functions Machine washable wool. Hand Wash Wełniane washable wool and delicate fab- Rinses 40 °C – Cold rics with «hand washing» care Spin phase at 800 symbol. -
Page 9: Hints And Tips
9 energy and water consumption for washing The actual water temperature may dif- that type of cotton laundry. fer from the declared cycle tempera- They agree with EN60456. ture. HINTS AND TIPS THE LAUNDRY LOAD DETERGENTS AND ADDITIVES • Divide the laundry in: white, coloured, •... -
Page 10: Before First Use
10 electrolux Water hardness Level Type °dH °T.H. mmol/l Clarke hard 15-21 26-37 2.6-3.7 17-25 very hard > 21 > 37 >3.7 >25 BEFORE FIRST USE 1. To activate the drain system, put 2 litre 2. Put a small quantity of detergent in the... - Page 11 11 2. Pull out the detergent divider from its 4. Press the Start button to start the pro- position (A). gramme until the button indicator is on. CANCEL A PROGRAMME 1. Turn the programme knob to cancel the programme and to deacti- vate the appliance.
-
Page 12: Care And Cleaning
12 electrolux If the temperature and level of the wa- – You must drain the water before to open ter in the drum are too high, you can- the door. not open the door. To drain the water: To open the appliance door: 1. - Page 13 13 4. Clean the dispenser recess with a brush. DETERGENT DISPENSER To clean the dispenser: 5. Put back the dispenser in the recess. 1. Press the lever and pull the dispenser out. DRAIN PUMP Regularly examine the drain pump and make sure that it is clean.
- Page 14 14 electrolux 3. Unscrew the filter to let the water flow 9. Make sure that you tighten correctly the out. filter to prevent leakages. 4. When the container is full of water, 10. Close the drain pump door. screw the filter again and empty the CLEAN THE INLET VALVE FILTER container.
-
Page 15: Troubleshooting
15 4. Install again the inlet hose. Make sure 2. Start the programme to drain the wa- that the couplings are tight to prevent ter. leakages. FROST PRECAUTIONS If the appliance is installed in an area where the temperature can be less than 0 °C, re- move the remaining water from the inlet hose and the drain pump. - Page 16 16 electrolux Problem Possible cause Possible solution The programme knob is not in Turn the programme knob in the correct the correct position. position. The delay start is set. To start immediately the programme, It is available only for models cancel the delay start.
-
Page 17: Installation
17 Problem Possible cause Possible solution The appliance fills with The end of the drain hose is Make sure that the drain hose is in the water and drain imme- too low. correct position. Refer to 'Installation'. diately. The washing results... - Page 18 18 electrolux 3. Remove the internal film. 6. Remove the polystyrene protection from the bottom. 4. Open the door and remove all the items from the drum. 7. Install the plastic cover (A), removed from the top of the packaging, to the bottom of the appliance.
- Page 19 19 10. Put the plastic caps in the holes. You can find these caps in the user manual bag. Caution! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level. THE INLET HOSE •...
- Page 20 20 electrolux With the plastic hose guide. Without the plastic hose guide. • • To a sink spigot. Refer to the illustration. Put the drain hose in the spigot and tighten it with a clip. Make sure that the drain hose...
- Page 21 21...
- Page 22 22 electrolux...
- Page 23 23...
- Page 24 155219270-A-352011...