Technical Data; Installation - Electrolux ERES38820X User Manual

Hide thumbs Also See for ERES38820X:
Table of Contents

Advertisement

14 electrolux

TECHNICAL DATA

Dimension
Voltage
Frequency
The technical information are situated in the
rating plate on the internal left side of the
appliance and in the energy label.
Water pressure range
The water pressure must be at least 1 bar (100kPa)
Highest allowed water pressure 10 bar (1000kPa)
Capacity 50-80 litres of carbonated water
per cylinder.
Important!
• Do not connect the appliance in spaces
where ambient temperature can de-
crease to below freezing.

INSTALLATION

Read the "Safety Information" carefully
for your safety and correct operation of
the appliance before installing the
appliance.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the
climate class indicated on the rating plate of
the appliance:
Climate
Ambient temperature
class
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Location
To ensure best performance, if the appli-
ance is positioned below an overhanging
wall unit, the minimum distance between
the top of the cabinet and the wall unit
Height
Width
Depth
• The appliance may only be connected to
drinking water supplies.
• The appliance may only be connected to
cold water supplies.
must be at least 40 mm . Ideally, however,
the appliance should not be positioned be-
low overhanging wall units.
The ventilation space can be:
• directly above the appliance
• behind and above the top cupboard.
In this case, the space behind the top
cupboard must be at least 50 mm deep.
1800 mm
595 mm
650 mm
230 V
50 Hz
Consult your installer if water pressure is
less than 1 bar.
If water pressure exceeds 10 bar a re-
duction valve must be fitted (available
from your specialist shop).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents