Print Is Too Light - Lexmark CS410 Manual

Action
Step 5
Check if the paper loaded in the tray has texture or rough finishes.
Are you printing on textured or rough paper?
Step 6
a
Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store paper in its
original wrapper until you use it.
b
Resend the print job.
Is the print still too dark?
Step 7
Replace the imaging kit, and then resend the print job.
Is the print still too dark?

Print is too light

Action
Step 1
a
From the Quality menu on the printer control panel, select Color Adjust.
b
Resend the print job.
Is the print still too light?
Step 2
a
From the Quality menu on the printer control panel, increase the toner
darkness.
Note: 4 is the factory default setting.
b
Resend the print job.
Is the print still too light?
Print quality guide
Page 8 of 18
Yes No
From the printer control Go to step 6.
panel, set the paper
texture in the Paper
menu to match the paper
loaded on the tray.
Go to step 7. The problem is solved.
Contact customer The problem is solved.
support.
Yes No
Go to step 2. The problem is solved.
Go to step 3. The problem is solved.