Arguments For One-Dimensional Bar Codes - Lexmark CS410 Technical Reference Manual

Arguments for one-dimensional bar codes

Key Type
/Symbology name
/Units —
/Height integer
/QuietZone [int int]
/Bars [int int int int]
/Spaces [num num num num]
/EmbedText name or
[name name]
/FontName name
/Pitch [int]
1
For the French postal symbology, /Special and /PrintCheckChar are always set to true and cannot be
changed to false.
Definition
Required
See "Values for /Symbology key" on page 80 for valid values.
Optional
Default value is 1/600 inch. Other valid values are 1/300, 1/1200,
and 1/720 inch, which also applies to height and width units for
any one-dimensional symbology.
Optional
In /Units; the default value is based on the symbology, see
"Values for /Symbology key" on page 80.
Optional
In /Units; the default value is [150 150].
Optional
In /Units; the default value is based on the symbology, see
"Values for /Symbology key" on page 80.
Optional
In /Units; the default value is based on the symbology, see
"Values for /Symbology key" on page 80.
Optional
The default is based on the symbology, see
"Values for /EmbedText key" on page 83. [array] is used by ISSN
and ISBN only.
Optional
See "Values for /FontName key" on page 83. The default value is
Courier-Bold.
Optional
This is used only by PostNet5, PostNet9, and PostNet11 bar
codes.
Allowed values are 20 through 24. Values less than 20 result in a
pitch of 20, values greater than 24 result in a pitch of 24. Default
is 22.
Arguments for one-dimensional bar codes
78