Control Panel - Electrolux ENA34835W User Manual

Hide thumbs Also See for ENA34835W:
Table of Contents

Advertisement

4 electrolux
pressor, condenser) to prevent possible
burn.
• The appliance must not be located close
to radiators or cookers.
• Make sure that the mains plug is accessi-
ble after the installation of the appliance.
• Connect to potable water supply only.
Service
• Any electrical work required to do the
servicing of the appliance should be car-
ried out by a qualified electrician or com-
petent person.
• Do not remove the LED light cover. Con-
tact the nearest After Sales Service Force
to replace the LED light board, if it is nec-
essary.
• This product must be serviced by an au-
thorized Service Centre, and only genu-
ine spare parts must be used.

CONTROL PANEL

A - Appliance button ON/OFF
B - Temperature regulation button
C - Temperature and function indicator
Display
10
9
8
7
1
Temperature indicator.
2
Excessive temperature alarm.
3
FreeStore funcion indicator.
4
Shopping function indicator.
4) If a water connection is foreseen.
A
B
1
2
3
4
6
5
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer,
in either its refrigerant circuit or insula-
tion materials. The appliance shall not
be discarded together with the urban
4)
refuse and rubbish. The insulation foam
contains flammable gases: the appli-
ance shall be disposed according to
the applicable regulations to obtain
from your local authorities. Avoid dam-
aging the cooling unit, especially at the
rear near the heat exchanger. The ma-
terials used on this appliance marked
by the symbol
C
D E
D - Function button
E - Confirmation button
6
Timer function indicator.
7
Positive or negative temperature indi-
cator.
8
Action Freeze function indicator.
9
Compartment indicator.
are recyclable.

Advertisement

Table of Contents
loading

Table of Contents