Table of Contents
Advertisement
7. Select the required options
The light corresponding to the depressed button
illuminates.
8. Select the DELAY START option
To delay starting of a programme, press the DELAY
START button. The figures corresponding to the
selected delay will be displayed for about 3 seconds,
after which the duration of the selected programme
will appear on the display.
During this period it is possible to load other laundry:
• depress START/PAUSE button;
• load the laundry;
• close the door and depress START/PAUSE button
again.
9. Start the programme
To start the selected programme, press the
START/PAUSE button; the corresponding light stops
flashing.
The pilot light corresponding to the wash phase
which is running is on.
The door light comes on to indicate that the door is
locked.
The machine starts operating.
If you have selected the delayed start the machine
starts its countdown. The display shows the delay or
the duration of the programme.
10. At the end of the programme
The machine stops automatically.
If the anti-crease
option has been selected, the
light of the START/PAUSE button
and the light
of the programme progress display
is on to indicate that the water must be emptied out
before opening the door. The display shows a zero.
At the end of the programme (after draining) a
flashing zero appears on the display.
The door can only be opened after the door locked
light has gone out.
Release of the lock is also indicated by the coming
on of the light
.
Turn the programme selector dial to Reset O.
Switch the machine off by pressing the ON/OFF
button
.
Remove the laundry from the drum and carefully
check that the drum is empty so as to avoid any
forgotten items being damaged in a subsequent
wash (e.g. shrinking) or their colour running into a
load of whites.
If you do not intend to carry out another wash, close
the water tap.
Leave the door open to prevent the formation of
mildew and unpleasant smells.
19
flashes
Hide quick links:
Advertisement
Table of Contents
