Table of Contents
Advertisement
7. Select the required options
The light corresponding to the depressed button
illuminates.
8. Select the DELAY START option
To delay starting of a programme, press the DELAY
START button. The corresponding light illuminates.
The figures corresponding to the selected delay will
be displayed for about 4 seconds, after which the
duration of the selected programme will appear on
the display.
When the START/PAUSE button is pressed, the
selected delay will again appear on the display and
the machine starts its countdown.
9. Start the programme
To start the selected programme, press the
START/PAUSE button; the corresponding light stops
flashing.
The pilot light corresponding to the wash phase
which is running is on.
The door light comes on to indicate that the door is
locked.
The machine starts operating.
10. At the end of the programme
The machine stops automatically. A flashing zero
appears on the display.
If the anti-crease
option has been selected, the
light of the START/PAUSE button
indicate that the water must be emptied out before
opening the door. Steadily lit zero appears on the
display.
The door can only be opened after the door locked
light has gone out.
Release of the lock is also indicated by the coming
on of the light
.
The buzzer sounds for about 2 minutes.
Turn the programme selector dial to Reset O.
Switch the machine off by pressing the ON/OFF
button
.
Remove the laundry from the drum and carefully
check that the drum is empty so as to avoid any
forgotten items being damaged in a subsequent
wash (e.g. shrinking) or their colour running into a
load of whites.
If you do not intend to carry out another wash, close
the water tap.
Leave the door open to prevent the formation of
mildew and unpleasant smells.
19
flashes to
Hide quick links:
Advertisement
Table of Contents
