Tll-1100A Cloning Connections/Learning Setup - LG 42700H - 42INCH CLASSHDTV Technical Manual

TLL-1100A CLONING CONNECTIONS/LEARNING SETUP
Connections for the TLL-1100A Clone Programmer to Learn the TV Master TV Setup
On Master TV
Set up all Master TV features on the ..................
menus and do a Channel Search.
Add Channel and Aux labels etc. See I _'_ A°'°nn:_
previous page. Insert MPI cable into ,
TV MPI port. ', _;_
T
On TLI_- 11OOA
1. Turn On the TLL-1100A.
2. Use the Mode button to select
Clone Mode.
3. Use the Left/Right arrow to
select the CBank (1 - 8) to store
the master setup in.
4. Plug the other end of the MPI
cable into the MPI port on the
bottom of the TLL.
5. With the Installer remote control,
select item 1 on TLL menu.
6. Press Enter, to transfer the
Master setup into CBankX on the
TLL The TLL will copy the master
setup.
Z When learning is done, discon-
nect MPI cable from Master TV.
8. Reconnect TV power cord. Power
the TV On and the master setup
should be resident on the TV.
Selected Bank: CBank X Saved
Bi|| i _:_ :n,,m = :[o],,l L
(2) TEACH TO TV
(3) SET CLONE CLOCK FROM W
(4) SET W CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
CLONE CLOCK =00:00
TV CLOCK=O0:O0
THE CLONEIS VERSION V2.2.2
-To change menuitems, Press
M.P.I. Learning Setup
"~r"
i
m
ODO
D,OQ
i.......
M.P.I. Teaching Setup
_ o_ . ...
~r" I
t T
T.--C7_
oclo
D,,o_ Q
A
i
CLONE SELECTION MENU
Selected Bank: CBank X Saved
/1 ) LEARN FROM TV
lt_Jl i _1':'[11_ l i itl i
(3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
CLONE CLOCK = 00:00
TV CLOCK = 00:00
THE CLONE IS VERSION V2.2.2
-To change menu items, Press
channel keys or digits.
-To execute item, Press ENTER.
i
I
On Target TV
1. Connect MPI cable from the TLL
to the MPI port on the Target
TV. Assure that the correct
CBank(X) is selected on TLL..
2. With the Installer remote control
select item 2, to Teach the target
TV the master TV setup.
3. Press Enter to begin teaching.
4. When Teaching is done, discon-
nect MPI cable and power the TV
Off. Unplug TV power cord.
5. Reconnect TV power cord. Power
the TV On and the master setup
should be resident on the TV.
N
0
I'rl
N
0
I"I'1
I-I1
-t
c
91