Cutter Blade Maintenance - Dixon ZTR 3000 SERIES Operator's Manual

CARE AND MAINTENANCE

CUTTER BLADE MAINTENANCE:

NOTE: Observe proper blade position prior to removal.
1. Safely raise front of mower.
2. Hold or block blade from turning.
3. Loosen blade nut and remove blade.
4. When replacing blade, tighten blade nut secur
CAUTION
NOTE:
Wear heavy, thick gloves when holding onto cutter blade, avoid the
sharp edge of the blade.
Be sure blade is centered on pilot before tightening nut to 60 ft. lbs.
torque.
ely. Refer to diagram.
(No trash guard on 30" machines.)
Page 25