Panasonic DMCFZ100 - DIGITAL STILL CAMERA Operating Instructions Manual page 39

} [SCENE MENU]
[MENU RESUME]
Ü [FAVORITE]
When it is set to [ON], you can set/cancel favorites by pressing 4
•
during playback. You can also set favorites from the playback menu.
For details, refer to P176.
[VERSION DISP.]
[FORMAT]
•
Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler
(optional) when formatting. Do not turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If the built-in memory or the card cannot be formatted, consult your nearest Service Center.
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
Preparation
Set the screen that is displayed when the mode dial is set to
, , , and
[OFF]: The recording screen in the currently selected
Advanced Scene Mode
appears.
[AUTO]: The Advanced Scene Mode or Scene Mode menu
screen appears.
The last operated menu position is saved even if the camera is
turned off.
[OFF]/[ON]
Marks can be added to pictures, and set up as favorites.
[OFF]/[ON]
It is possible to check which version of firmware is on the camera.
The built-in memory or card is formatted.
Formatting permanently deletes all data on your memory
card. Please be sure all pictures and motion pictures are
saved elsewhere before using this feature.
- 39 -
.
(P91) or Scene Mode
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
,
(P96)