[Protect] - Panasonic DMCFZ100 - DIGITAL STILL CAMERA Operating Instructions Manual

You can set protection for pictures you do not want to be deleted by mistake.
•
For details about the icon display during burst picture group playback, refer to
[FAVORITE], [PRINT SET] and [PROTECT] icons during playback of burst picture groups.
Select [PROTECT] on the [PLAYBACK] Mode menu.
Press 3/4 to select the item and then press
[MENU/SET].
•
When [SINGLE IN BURST GROUP] or
[MULTI IN BURST GROUP] is selected, press 3/4/2/1 to
select burst picture group, and press [MENU/SET] to proceed to
3
step .
• When [CANCEL] is selected, see
"
settings .
Select the picture, and then
press [MENU/SET] to set.
When [MULTI] has been selected
•
Repeat these steps for each picture.
•
The settings are canceled when
[MENU/SET] is pressed again.
Press [‚] to return to the menu screen.
•
Press [MENU/SET] to close the menu.
∫ Canceling all the [PROTECT] settings
1
Select [CANCEL] on the screen shown in step
2
Press 3 to select [YES] and then press [MENU/SET].
3
Press [MENU/SET] to close the menu.
•
If you press [MENU/SET] while canceling protection, the canceling will stop halfway.
Note
•
The protect setting may not be effective on other equipment.
•
Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in
memory or the card is formatted.
•
Even if you do not protect pictures on a card, they cannot be deleted when the card's
Write-Protect switch is set to [LOCK].
Advanced (Playback)

[PROTECT]

" Canceling all the [PROTECT]
[SINGLE]
Press 2/1 to select
the picture.
2
- 179 -
"
About display of
(P28)
[MULTI]
Press 3/4/2/1 to
select the pictures.
and then press [MENU/SET].
"
on P156.