Taking Pictures Or Taking Pictures With Burst While Recording Motion Pictures - Panasonic DMCFZ100 - DIGITAL STILL CAMERA Operating Instructions Manual

Taking pictures or taking pictures with Burst while recording Motion Pictures

Still pictures can be recorded even while recording a motion picture. It is also possible to
record with burst.
∫ Taking a still picture while recording a motion picture
During motion picture recording, press the shutter
button fully to record a still picture.
∫ Burst during motion picture recording
1
Setup burst (P82)
2
Hold down the shutter button fully while recording motion pictures.
•
You can set [ 2 ], [
¢ It is automatically set to [
when it is set to [
Note
• Recordable pixels and recordable number of pictures are displayed by pressing the shutter
button halfway.
•
Recording of motion picture will continue after taking the still picture.
•
Recording is performed by the electronic shutter, so the recorded picture may appear warped.
•
Simultaneously recorded still pictures will be recorded in an aspect ratio of [W], and picture
size of [3.5 M]. The picture quality may be different from [3.5 M] of standard pictures.
•
Up to 40 still pictures can be recorded during recording of the motion picture.
•
Only JPEG images are recorded when [QUALITY] is set to [
[ ] or [ ], still pictures will be recorded in [QUALITY] of [A].)
•
The flash setting is fixed to [Œ].
•
Zooming may stop when a picture is recorded while zooming.
•
Simultaneous recording is not possible in the following cases:
–
When [MOTION JPEG] is set to [
–
In [HIGH SPEED MOVIE] in Scene Mode
–
In Creative Motion Picture Mode
•
When Intelligent Auto Mode is selected in step
matching to the subject or recording situation can be performed.
∫ Scene Detection
When the camera identifies the optimum scene, the icon of the scene concerned is
displayed in blue for 2 seconds, after which its Color changes to the usual red.
>
¦
[i-PORTRAIT]
[i-SCENERY]
[i-LOW LIGHT]
[i-MACRO]
•
[ ¦ ] is set if none of the scenes are applicable, and the standard settings are set.
• When [ ] is selected, the camera automatically detects a person's face, and it will adjust the
focus and exposure. (Face Detection)
Advanced (Recording pictures)
before starting motion picture recording.
5 ] and [ 10 ] in Burst Mode.
2 ] when it is set to [
11 40 60
], [ ], or [ ].
] or [
When set to Intelligent Auto Mode
(P140)
¢
], [ 5 ] when it is set to [
]
1
on page 107, motion picture recording
- 110 -
], and [
], [ ] or [ ]. (When set to
10 ]