Panasonic DMCFZ100 - DIGITAL STILL CAMERA Operating Instructions Manual page 17

Dmcfz100 user guide
Table of Contents

Advertisement

Connect the charger to the electrical
outlet.
Disconnect the charger from the electrical socket
and detach the battery after charging is
completed.
The AC cable does not fit entirely into the AC
input terminal. A gap will remain as shown on the
right.
∫ About the [CHARGE] indicator
The [CHARGE]
indicator turns on:
The [CHARGE]
indicator turns off:
When the [CHARGE] indicator flashes
The battery temperature is too high or too low. It is recommended to charge the battery again
in an ambient temperature of between 10 ºC to 30 ºC (50 oF to 86 oF).
The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
Preparation
The [CHARGE] indicator
The [CHARGE] indicator
charging has completed without any problem.
- 17 -
plug-in type
90°
inlet type
is turned on and charging will start.
A
A
of the charger will turn off once the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-fz100

Table of Contents