CDA 11Z6 Manual For Installation, Use And Maintenance page 42

42
3. Replace the Inner Pane:
– Check that the four rubber pads are in place (D in fig. 31).
– Check that you are holding the pane the correct way. You should be able to
read the wording on it as it faces you.
– Insert the pane in the left E and right F slide guides (fig. 32), and gently slide
it to the retainers H (Fig. 33).
– Top oven door only: reassemble the seal G in the correct way (fig. 34) by
hooking the no. 3 fixing hooks in the proper holes (fig. 35).
4. Unlock the oven door by opening it completely and closing the lever A on
the left and right hinges (fig. 36).
D
Fig. 31
Fig. 33
The top oven
door has a
sealed gasket in
the top part.
It is normal the opened gap between
the top edge of the inner glass and the
sealed gasket. This allows the cooling
air circulation.
The bottom
oven door has
not a sealed
gasket in the
top part.
E
E
Fig. 32
H
H
H
Fig. 35
Fig. 36
F F
G G
Fig. 34
A
A