Datamax E-3202 Operator's Manual page 38

Problem/Symptom
SOFTWARE
The printout includes
linear gaps between
lines of print.
The printer will not print.
The printer produces
garbage characters
when it prints.
30
Disable the AUTO LF and AUTO FF in the
E-3202 configuration.
Make sure that you have configured your
printer correctly. Verify the following
settings:
Select an emulation that will
accommodate your PC's software
(ESC/POS or Epson 24 pin).
Make sure that your printer's COM port
settings match those of your PC.
Make sure that you have a roll of print
media properly loaded in the printer.
Make sure that you have selected the
correct emulation. Also make sure that your
printer's COM port settings match those of
your PC and the printer is not in "Dump"
mode.
Resolution
E-3202/Cash Drawer Printer