Connecting To An Esc Pos Terminal - Datamax E-3202 Operator's Manual

4.4 Connecting to an ESC POS Terminal

The default configuration of your printer is ESC/POS. Check your
Terminal communication parameters and change the printer settings to
match your terminal settings.
Default Communication parameters
Speed:
Data:
Parity:
Control:
To check the current emulation and communication parameters of your
printer:
1. Make sure that a roll of paper is loaded.
2. Set the printer to "Off".
3. Press both buttons simultaneously until the configuration is printed.
If the configuration is not correct see section 4.4 Changing the Default
Settings.
E-3202/Cash Drawer Printer
9600 baud
8 bits
None
Hardware
19