Datamax E-3202 Operator's Manual page 30

Printing The List Of Parameters
While the printer is turned OFF, switch to the Setting Mode by pushing
simultaneously both buttons for at least two seconds. The printer prints
the following settings (Standard configuration):
Datamax E-3202
Version: AA xx.xx
PRESENT SETTINGS
Communication parameters
Speed:
Data:
Parity:
Control:
Ø To keep these settings unchanged push the 'NO' key.
Ø To enter the set-up menu push the 'YES' key.
Set-up menu
To change settings:
Ø Use the 'No' key to move from a chapter (section) to another.
Ø Use the 'YES' key to enter a chapter (section).
Within a chapter (section):
Ø Use the 'No' key to move from a parameter to another.
Ø Use the 'Yes' key to validate your parameter.
22
9600 baud
8 bits
None
Hardware
E-3202/Cash Drawer Printer