Advertisement
Managed Power Strips Provide Distribution,
Control, And Monitoring To Rack Applications
Liebert OpenComms
™
EM
For event greater flexibility, the Liebert OpenComms
EM is designed to monitor temperature, humidity and
contact closures inside critical environments, including
racks and small computer rooms.
For applications that require the management of
power within the Network rack, the OpenComms EM
PDU option manages up to (2) two Liebert MP Advanced
Power Strips.
This compact device provides network connectivity
through Web access and/or E-Mail Notifications of
events for stand-alone applications.
The SNMP interface provides access to parameteric
data and notifications of alarm events to Liebert
OpenComms Nform Critical Management Software
and/or a Network Management System.
On-line Demo Sites:
http://mpwebdemo.liebert.com
http://emwebdemo.liebert.com
Liebert
OpenComms™ EM
Interface With Most Critical Support Equipment
Liebert OpenComms Nform will monitor any Liebert
SNMP device that supports a network interface, such as
the OpenComms Web card and the OpenComms NIC
(network interface card). This will allow connection to
a full range of Liebert power and mission-critical cooling
systems and equipment from other manufacturers,
including DC power systems and other third party
SNMP-based products.
Connectivity to Liebert OpenComms Nform can
also be achieved with the Liebert OpenComms EM
network-enabled monitoring device. The unit provides
SNMP traps for use with Liebert OpenComms Nform.
The software can also be connected to the Liebert
MP-S Access Server which is used to communicate
with and monitor Liebert MP Advanced Power Strips.
OpenComms EM Advantages
■
Monitor Temperature and Humidity
in the Rack
■
E-mail Notifications directly from
OpenComms EM
■
Trending of Environmental and
Power data points
■
Communicate and Monitor MP
Advanced Power Strips Via MP-S
Access Server
7
Advertisement
