Remote Control - Pioneer Elite VSX-43 Operating Instructions Manual

1
1

Remote control

1
RECEIVER
SLEEP SOURCE
2
RECEIVER
3
INPUT
4
5
6
AUDIO TOOLS
PARAMETER MENU
TOP
MENU
7
ENTER
8
HOME
MENU
PTY BAND
iPod CTRL RETURN
MUTE
9
1 2 3
DISP
4 5 6
CH
10
7 8 9 CH
SHIFT
0
CLR ENTER
RECEIVER
• The following buttons are not used with this receiver:
-
PTY,
SHIFT
1
SLEEP
11
Press to change the amount of time before the receiver
switches into standby (30 min – 60 min – 90 min – Off). You
can check the remaining sleep time at any time by pressing
once.
SLEEP
2
RECEIVER
Switches the receiver between standby and on.
12
3
RECEIVER
Switches the remote to control the receiver (used to select the
white commands above the number buttons (MIDNIGHT,
etc)). Also use this button to set up surround sound
or Audio parameters (page
4
INPUT SELECT
Use to select the input source
13
5
Input function buttons
Use to select the input source to this receiver
will enable you to control other components with the remote
control (page 57).
6
Listening mode buttons
14
– Switches between Auto surround mode
AUTO/DIRECT
(page 34) and Stream Direct playback
ALC/STANDARD SURR
and to switch between the modes of 2 Pro Logic II, 2
15
Pro Logic IIx, 2 Pro Logic IIz and NEO:6, and the Auto
level control stereo mode
– Switches between the various surround
ADV SURR
modes (page 35).
7
16
Receiver and component control buttons
The following button controls can be accessed after you have
selected the corresponding input function button (BD, DVD,
etc.).
Press first to access:
RECEIVER
AUDIO PARAMETER
(page 37).
– Press to access the Home Menu
HOME MENU
(page 49).
– Confirm and exit the current menu screen.
RETURN
Press BD, or
DVD DVR/BDR
Press
Press
(page 49)
37).
8
Use the arrow buttons when setting up your surround sound
(page 25).
system
menus/options.
(page 25). This Use
PRESET /
(page
9
The main buttons (, , etc.) are used to control a component
after you have selected it using the input function buttons.
(page 35).
The controls above these buttons can be accessed after you
– Press for standard decoding
have selected the corresponding input function button (BD,
DVD
below.
(page 34).
Press
– Use to access the Audio options
10
Use the number buttons to directly select a radio frequency
(page
that can be accessed after
MIDNIGHT, etc.)
first to access:
9
Controls and displays
– Displays the disc 'top' menu of a Blu-ray
TOP MENU
Disc/DVD.
– Displays the HOME MENU screen.
HOME MENU
– Confirm and exit the current menu screen.
RETURN
– Displays the TOOLS menu of Blu-ray Disc player.
MENU
first to access:
TUNER
– Memorizes stations for recall (page
TOOLS
used to change the name (page 33).
– Switches between AM, FM ST (stereo) and FM
BAND
MONO radio bands (page 32).
first to access:
iPod/USB
– Switches between the iPod controls and the
iPod CTRL
receiver controls (page 27).
/// (TUNE /, /),
PRESET
(page 49). Also used to control Blu-ray Disc/DVD
TUNE / can be used to find radio frequencies and
can be used to select preset radio stations
33).
Component control buttons
and CD). These buttons also function as described
first to access:
RECEIVER
– Use to adjust Bass or Treble.
BASS +/–, TRE +/–
• These controls are disabled when the listening mode is
set to DIRECT or PURE DIRECT.
• When the front speaker is set at SMALL in the Speaker
Setting (or automatically via the Auto MCACC setup)
and the X.Over is set above 150 Hz, the subwoofer
channel level will be adjusted by pressing
(page 50).
Number buttons and other component controls
32) or the tracks on a CD, etc. There are other buttons
is pressed. (For example
RECEIVER
4
7
32), also
62
ENTER
BASS +/–