Listening To Music Contents Of Bluetooth Wireless Technology Device With Your System; Air Jam - Pioneer Elite VSX-43 Operating Instructions Manual

4
4
• When using the AS-BT200 only: This unit complies with
Bluetooth Specifications Ver. 2.1. When this unit and
another device equipped with Bluetooth wireless
technology both comply with Bluetooth Specification Ver.
2.1, pairing of the two may be possible without the need for
inputting a password.
In this case, a passcode may be displayed on this receiver
and on the device equipped with Bluetooth wireless
technology. If this happens, check that the same passcode
is displayed on this receiver and the device equipped with
Bluetooth wireless technology, then press ENTER. After
this, also perform the connection operation on the
Bluetooth device to be connected. If the passcode does not
match the code displayed on the Bluetooth device to be
connected, press to cancel pairing, then try
RETURN
starting over.
Press to set the ADAPTER input, then conduct
ADAPTER
the pairing operation on the Bluetooth wireless technology
device. If pairing is successful, there is no need to
performing the pairing operation below.
• Pair one unit at a time.
• When connecting this receiver by Bluetooth connections
with a device equipped with the Bluetooth function to listen
to music, do not connect any devices other than this
receiver by Bluetooth connection to the Bluetooth-equipped
device. If a Bluetooth connection is already established with
a device other than this receiver, disconnect the other
device before connecting this receiver.
1
Press ADAPTER to switch the receiver to ADAPTER
input.
2
Press TOP MENU to select Bluetooth Setup.
3
/
Use to select PIN, then press ENTER.
4
/
Use to select one of PIN codes 0000, 1234 or 8888,
then press ENTER.
You can use any of 0000/1234/8888 PIN codes.
Bluetooth wireless technology device using any other PIN
code cannot be used with this system.
5
Switch on the Bluetooth wireless technology device
that you want to make pairing, place it near the system
and set it into the pairing mode.
6
Check to see that the Bluetooth ADAPTER is detected by
the Bluetooth wireless technology device.
When Bluetooth wireless technology device is connected:
Bluetooth wireless technology device name appears in
the receiver display.
• The system can display alphanumeric characters only.
Other characters may not be displayed correctly.
When Bluetooth wireless technology device is not
connected:
WAITING appears in the receiver display. In this case,
perform the connection operation from the side of the
Bluetooth wireless technology device.
7
From the Bluetooth wireless technology device list,
select Bluetooth ADAPTER and enter the PIN code
selected in the step 4.
• PIN code may in some case be referred to as
PASSKEY.
Listening to Music Contents of Bluetooth wireless
technology device with Your System
1
Press ADAPTER to switch the receiver to ADAPTER
input.
The ADAPTER input can also be selected by pressing
on the front panel. In this case,
SOUND RETRIEVER AIR
S.R AIR, the optimum listening mode, is selected
automatically.
2
Perform the connection operation from the side of the
Bluetooth wireless technology device to the Bluetooth
ADAPTER.
• When the Bluetooth ADAPTER is not plugged into the
ADAPTER PORT terminal, NO ADP will be displayed if
ADAPTER input is selected.
3
Start playback of music contents stored in Bluetooth
wireless technology device.
This receiver's remote control buttons can be used for
basic playback of files stored on the Bluetooth wireless
technology device.
31
• Bluetooth wireless technology device should be
compatible with AVRCP profile.
Depending on Bluetooth wireless technology device
•
you use, operation may differ from what is shown in
the remote control buttons.
iPod CTRL
RETURN
MUTE
4
RECEIVER
While listening to a source, press
ADV SURR repeatedly to select S.R AIR.

AIR JAM

Air Jam – a Pioneer-exclusive application and available for
free.
Air Jam lets you connect multi compatible devices to this unit
using Bluetooth wireless technology. With it, you can make a
group playlist directly on a supported device to play in your
home theater through the unit. You and your friends can add
songs from your devices to the playlist. Also Air Jam lets you
delete the song before anyone has to hear it.
1
Press ADAPTER to switch the receiver to ADAPTER
input.
2
Press TOP MENU to select Bluetooth Setup.
3
/
Use to select 'Air Jam', then press ENTER.
4
/
Use to select 'Air Jam ON', then press ENTER.
For more details on using Air Jam, access our website.
http://pioneer.jp/support/soft/iapp_airjam/en.html
®
The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by PIONEER CORPORATION is under license. Other
trademarks and trade names are those of their respective
owners.
Basic playback
4
7
62
then press