Table of Contents
Advertisement
SH624 Security/Home Automation
Remote Control
Install four AAA alkaline batteries
1.
in the SH624's battery compart-
ment.
Set the Console's slide switch to
2.
INSTALL.
3.
Press [ARM HOME) or [ARM
AWAY] on the SH624.
The Console emits a tone. If you do
not hear a tone, press the SH624's
[CODE) button with a pencil.
Then, repeat this step.
Note: The SH624's [CODE] button is
located underneath its finder label.
4. To set up additional SH624s (up to
eight), repeat steps l-3.
When you set the Console back to
RUN it plays back the stored message
and the BUSY light stays on for 15
seconds.
Note: you can install any combination
of Remote Control types (HT544,
KF574 or SH624) up to a total of eight
Remote Controls. For example: you
could install two HT544s, two SH624s
and four KF574s, or any other combi-
nation up to a total of eight Remote
Controls.
[CODE] button under here.
I/
SH624
Hide quick links:
Advertisement
Table of Contents
