Setting Up Telephone Dialer; Phone Numbers; Voice Message - X-10 POWERHOUSE PS561 Owner's Manual

SETTING UP THE TELEPHONE DIALER
Setting Up Phone Numbers
Warning: Only program the Console
to call someone with whom you have
discussed your Security System and
who would expect such a calI (such as
a friend, relative or neighbor) who can
then listen to determine if there is a
real problem. The person can then calI
for assistance to be sent if necessary,
or call you back to see if everything is
o.k. DO NOT program the Console to
call anyone who would not expect the
call (the Police for example).
1. Set the Console's INSTALL/RUN
switch to INSTALL.
2. Press [PROG] button.
3. Enter the first phone number that
you want the Console to call in the
event of a problem. e.g 555-1234.
Press the [MEM] button.
4.
5. Press [ 1] t store the phone number
o
in memory location 1.
Press [PROG], enter a second phone
number, then press [MEM], [2].
Press [PROG], enter a third phone
number, then press [MEM], [3].
Press [PROG], enter a fourth phone
number, then press [MEM], [4].
Repeat steps 1 through 5 to change a
phone number.
1 2
0 0
4 5
0 0
8
7
0 0
PROG 0
0 0
If you only want to store 1 phone
number, "fill up" the memory loca-
tions with the same number. i.e.
Memory Location 1 - 555-1234
Memory Location 2 - 555-1234
Memory Location 3 - 555-1234
Memory Location 4 - 555-1234
For 2 phone numbers:
Memory Location 1 - 555-1234
Memory Location 2 - 555-1234
Memory Location 3 - 555-6789
Memory Location 4 - 555-6789
Note: The Console will not work
through a switchboard or phone sys-
tem that requires a delay after the "9"
for an outside line.
Storing a Voice Message
1.
2.
3.
4.
5.
3
0
6
0
9
6.
0
MEM
0
Repeat l-6 to change the message.
Plug the included earphone into the
jack on the side of the Console
Set the Console to INSTALL.
Press the [RECORD] button.
The RECORD light turns on.
Speak clearly into the microphone
on the front of the Console. You
can record up to 15 seconds of
speech. For example: "This is Mrs.
Smith. There's a strange noise in
my house. Please press 0 to listen."
After 15 seconds the RECORD
light turns off.
Set the Console to RUN. The Con-
sole plays back your message
through the earphone so you can
hear what it sounds like (it sounds
better over the phone line).
If you want to hear the message
again, set the Console to INSTALL
then back to RUN.
15