Chapter 4: Connecting The Wireless-G Media Storage Link Router; Instructions For Connecting The Router; Figure 4-1: Connect The Usb Disk - Linksys WRTSL54GS User Manual

Wireless-G Media Storage Link Router with SpeedBooster
Chapter 4: Connecting the Wireless-G Media Storage Link
Router

Instructions for Connecting the Router

1. Power down your network devices.
2. Locate an optimum location for the Router. The best place for the Router is usually at the center of your
wireless network, with line of sight to all of your mobile stations.
3. Fix the direction of the antenna. Try to place the Router in a position that will best cover your wireless
network. Normally, the higher you place the antenna, the better the performance will be.
4. Connect a USB cable to the Router's USB port. Then, connect the other end of the USB cable to the USB hard
disk. (If you have a USB flash drive, you can connect it directly to the Router.)

Chapter 4: Connecting the Wireless-G Media Storage Link Router

Instructions for Connecting the Router

Figure 4-1: Connect the USB Disk

8