Wireless-G Media Storage Link Router with SpeedBooster
Default Gateway. This is the IP address of the gateway device that allows for contact between the Router and
the remote network or host.
Interface. This interface tells you whether the Destination IP Address is on the LAN & Wireless (Ethernet and
wireless networks), the WAN (Internet), or Loopback (a dummy network in which one PC acts like a network—
necessary for certain software programs).
Click the Show Routing Table button to view the Static Routes you've already set up.
After you have made your changes, click the Save Settings button to apply your changes, or click the Cancel
Changes button to cancel your changes.
Chapter 6: Configuring the Wireless-G Media Storage Link Router
The Setup Tab - Advanced Routing
Figure 5-18: Routing Table Entry List
21