The Status Tab - Router; Figure 5-62: Status Tab - Router - Linksys WRTSL54GS User Manual

Wireless-G Media Storage Link Router with SpeedBooster

The Status Tab - Router

The Router screen on the Status Tab displays the Router's current status.
Router Information
Firmware Version. This is the Router's current firmware.
Current Time. This shows the time, as you set on the Setup Tab.
MAC Address. This is the Router's MAC Address, as seen by your ISP.
Router Name. This is the specific name for the Router, which you set on the Setup Tab.
Host Name. If required by your ISP, this would have been entered on the Setup Tab.
Domain Name. If required by your ISP, this would have been entered on the Setup Tab.
Internet

Figure 5-62: Status Tab - Router

Configuration Type
Displayed here is the information entered on the Setup Tab and required by your ISP for connection to the
Internet. This status information may vary depending on the connection type you are using.
If the Login Type is Automatic Configuration - DHCP, you can click the DHCP Release button to release the
Router's Internet IP address, and click the DHCP Renew button to renew the Router's Internet IP address. For
dial-up type connections such as PPPoE, you can click the Connect to have the Router connect to the Internet, or
click the Disconnect button to have the Router disconnect from the Internet.
Click the Refresh button to update the on-screen information.
Chapter 6: Configuring the Wireless-G Media Storage Link Router 48
The Status Tab - Router