Basic Troubleshooting
This section gives some simple suggestions for troubleshooting problems with your Gateway's
initial configuration.
Before troubleshooting, make sure you have
•
plugged in all the necessary cables (see
•
set your PC's TCP/IP controls to obtain an IP address automatically (see
ration" on page
The first step in troubleshooting is to check the status indicator lights (LEDs) in the order out-
lined below.
Front View
Power
Ethernet 1, 2, 3, 4
Wireless
16
11).
"Connections" on page
DSL
WPS
USB
4); and
"Client Configu-
Activity
Internet