Wall Mounting Option - Asus WL 320gE - Wireless Access Point User Manual

Note: Use only the power adapter included in the product package. Using another power supply
may damage the Access Point.
The Power LED on the front of the Access Point will light up when the unit is
powered ON. In addition, the green Link LED will turn ON to indicate that the
Access Point has a physical Ethernet network connection.
2.2

Wall Mounting Option

The ASUS WL-320gE Access Point is designed to sit on a raised flat surface like a
file cabinet or a bookshelf. The unit may also be converted for mounting to a wall
or ceiling.
Follow these steps to mount the ASUS
802.11g WLAN AP to a wall:
1. Look on the underside for the two
mounting hooks.
2. Mark two upper holes in a flat surface.
3. Tighten two screws until only 1/4" is
showing.
4. Latch the hooks of the ASUS WL-320gE
onto the screws.
Note: Readjust the screws if you cannot latch the Access Point onto the screws or if it is too
loose.
Chapter 2 - Hardware Installation
ASUS 802.11g Access Point 1