Technical Specifications - Asus WL 320gE - Wireless Access Point User Manual

802.11g access point
Hide thumbs Also See for WL 320gE - Wireless Access Point:
Table of Contents

Advertisement

Chapter 1 - Introduction
1.3

Technical Specifications

Ethernet interface
Antenna
Output power
Power adapter
Reset button
LED
Size
Weight
Operating Frequency
Spreading
Modulation
Emissions
Data rate
Operation channels
Range
10
HARDWARE
RJ45 for 10/100 BaseT with auto cross-over function
(MDI/MDI-X)
1 x external dipole antenna with Reverse-SMA
antenna connector, 1 X internal Inverted-F
PCB antenna (TBD)
24dBm in b mode and 20dBm in g mode with 1.5dB
tolerance
AC Input: 100V~240V(50~60HZ)
DC Output: 5V with max. 2 A current
Using a pen or a paper clip, press for over five
seconds to restore the AP to its factory default
settings.
Power, Ethernet, Wireless Activities, and Wireless
LED Association
Wireless Association behavior:
• On: associated (AP mode), or associates with an AP
(EA mode or URE is enabled, RSSI>= -65dBm)
• Flashing: (EA mode or URE is enabled)
< -89 dBm On: 200 ms, Off: 1000 ms
>= -89 dBm < -83 dBm On: 200 ms, Off: 800 ms
>= -83 dbm < -77 dBm On: 200 ms, Off: 600 ms
>= -77 dBm < -71 dBm On: 200 ms, Off: 400 ms
>= -71 dBm < -65 dBm On: 200 ms, Off: 200 ms
• Off: not associated (AP mode), or associates with
no APs (EA mode)
185 mm x 205 mm x 36 mm (LxWxH). Size excludes
the external antenna
500g (excluding power supply)
2.4 - 2.5 GHz
Direct Sequence Spread Spectrum
OFDM, CCK, DQPSK, DBSPK
ETS; CE Mark; FCC Part 15
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11b: 1, 2, 5.5, 11Mbps
11 for N. America, 14 Japan, 13 Europe (ETSI)
3 (non-overlapping)
(continued on the next page)
ASUS 802.11g Access Point

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents