Table of Contents
Advertisement
4. Attach one end of the AC power adapter, included in the product pack-
age, to the back of the Access Point and the other end to a power outlet.
Note: Use the Access Point only with the power adapter supplied
by ASUS in the product package. Using another power supply may
damage the Access Point.
The Power LED on the front of the Access Point will light up when the unit
is powered ON. In addition, the green Link LED will turn ON to indicate
that the Access Point has a physical Ethernet network connection.
Wall Mounting Option
Out of the box, the ASUS SpaceLink Access Point is designed to sit on a
raised flat surface like a file cabinet or book shelf. The unit may also be
converted for mounting to a wall or ceiling.
Follow these steps to mount the Access Point to a wall:
1. Remove the base by pressing the tab and sliding the base.
2. Remove the side cover to expose the mounting hooks.
3. Locate the screws provided with the Access Point.
4. Mark two holes in a flat surface using the provided hole template.
5. Tighten the two provided screws until only 1/4" is showing.
6. Latch the Access Point onto the two screws.
Note: Readjust the screws if you cannot latch the Access Point onto
the screws or if it is too loose.
Chapter 2 - Installation
ASUS SpaceLink Access Point
7
Advertisement
Table of Contents
