Chapter 3 - Software Configuration
3.11
Firmware Restoration
Firmware Restoration is a utility that searches for an ASUS 802.11g AP that failed
during its firmware upgrading process, then restores or re-uploads the firmware
that you specify. The process takes about three to four minutes.
Note: This is not a firmware upgrade utility and cannot be used on a working ASUS 802.11g AP .
Normal firmware upgrades must be done through the web interface.
Using a Hub
If you encounter problems uploading a firmware using a network hub, try
connecting your computer directly to either a 10Base-T or 10Base-TX LAN
(Ethernet) port.
6
ASUS 802.11g Access Point