Messages - Panasonic AWRP120 Operating Instructions Manual

Messages

When starting up and switching camera groups
Indication
Don't touch
PTZ Lever!
Connecting to
cameras
Operation lock
Indication
LOCKED!
IP connection settings
Indication
Unavailable
network setting
IP Duplicate!
Please reboot
AW‑RP120
When setting the connection types for remote cameras
Indication
Setting
CTRL TYPE
56
Description
Do not operate the PAN/TILT lever
and the ZOOM button because they
are being initialized .
Connecting to the remote cameras
has started .
Description
Operation is disabled .
z When an operation is performed
z
while the indicator of the ENABLE
button of the corresponding area
is off .
z When a number button with a
z
menu assigned is pressed while
menu operation is disabled .
Description
The entered IP address, subnet
mask, or port number cannot be set .
Enter a correct value .
⇒ " Network settings of the unit" in
<Basics> (page 27)
The entered IP address is a
duplicate of the IP address set
for another item (the connection
destination IP address for another
camera number or the switcher or
the IP address of the unit) .
The unit needs to be rebooted .
Turn the unit's power off and then
back on .
Description
The connection types for remote
cameras are being changed .
Preset memory
Indication
CAM### PMEM
STORE COMPLETE
CAM### PMEM
DELETE COMPLETE
Used by TMEM .
z A number is displayed instead of "#" .
z
Tracing memory
Indication
CAM##: TMEM
#m##s Remained .
TM##:
Standby Store
TM##:
Waiting Opr .
TM##: #m##s
Storing...
TM##: #m##s/#m##s
Standby Recall
TM##: #m##s/#m##s
Recalling...
TM##: #m##s/#m##s
Standby Restore
TM##: #m##s/#m##s
Restoring...
Please wait
FLASH Accessing .
CAM GRP can't be
changed in TMEM
TMEM
DELETE COMPLETE
z A number is displayed instead of "#" .
z
Description
Preset memory registration has
completed .
Preset memory deletion has
completed .
Overwriting or deletion is not
possible because tracing memory is
registered to the selected number
button .
Description
# minutes ## seconds of recording
is still possible for the tracing
memory of CAM## .
The recording standby state of
tracing memory .
The recording operation wait state of
tracing memory .
Recording tracing memory .
The recall wait state of tracing
memory .
Recalling tracing memory .
The restore standby state of tracing
memory .
Restoring tracing memory .
Writing data to the flash memory in
the unit after recording or restoring
tracing memory .
The camera group cannot be
switched in TMEM mode .
Tracing memory deletion has
completed .