Table of Contents
Advertisement
How to use on-screen menus
Menu operations
[MAIN MENU]
MARKER
FUNCTION
VIDEO CONFIG
SYSTEM CONFIG
HOURS METER
MENU button
1.
Press the MENU button.
The "MAIN MENU" appears.
Note
The display turns off after 2 minutes of inaction.
(The value shown before the display turns off is confirmed.)
2.
Turn the SELECT dial to move
press the SELECT dial to select it.
The selected item opens.
z Press the MENU button to return to the previous screen.
z Pressing the MENU button when the [MAIN MENU] is displayed
turns off the menu display.
3.
Again, turn the SELECT dial to select a menu item to be
set, then press the SELECT dial.
The set value changes to green.
[FUNCTION]
FUNCTION1
FUNCTION2
FUNCTION3
FUNCTION DISPLAY
4.
Turn the SELECT dial to select a set value.
z To cancel, press the MENU button.
5.
Press the SELECT dial.
The set item is entered.
10
SELECT dial
to a MENU item, then
MONO
PIXEL TO PIXEL
FOCUS-IN-RED
ON1
Menu configuration
MAIN MENU
MARKER
MARKER
ZONE
4:3
BACK
CENTER
CROSS HATCH
SIZE
FUNCTION
FUNCTION1
FUNCTION2
FUNCTION3
FUNCTION DISPLAY
VIDEO CONFIG
GAMMA SELECT
FILM GAMMA
COLOR TEMP.
SHARPNESS MODE
SHARPNESS H
SHARPNESS V
MONO
SCAN
SYSTEM CONFIG
UP TALLY LAMP
WFM
WFM POSITION
HOURS METER
OPERATION
LCD
Advertisement
Table of Contents
