VIEWING ON TV SCREEN
1. Turn on the TV and set the input selector to the Input connection the memory camcorder is connected to.
This is often referred to as "line".
•
Refer to the TV instruction manual for how to switch
the TV input.
2. Turn the memory camcorder on.
Slide the POWER switch downward and press the
•
MODE button to set Play (
The image that the memory camcorder is viewing will
•
appear on the TV screen.
•
You can also monitor the image on the LCD screen
of the memory camcorder.
3. Perform playback.
You can perform playback, recording or setting the
•
menu while viewing on TV screen.
•
Information that the memory camcorder is recording will appear on the TV screen: You can also display only part of
information or switch off the display. Refer to "TURNING THE SCREEN INDICATORS ON/OFF (
and press the
When "TV Display" is set to "Off ", OSD (On-Screen-Display) does not appear on the TV screen. ➥page 88
•
•
Howling may occur when the memory camcorder is too close to the other devices or the volume is high.
Keep the memory camcorder a reasonable distance away from the other connected devices.
•
When the AV cable is connected to the memory camcorder, the built-in speaker will automatically turn off and you
can not adjust the volume bar.
Image display depending on LCD and TV screen ratio
16:9
(Movie images only)
4:3
Refer to page 66 for "16:9 Wide" setting.
). ➥ page 22
button to switch the display status.
Record
Photo
-
LCD
16:9
)" on page 30,
Icon
Subject
TV
4:3
English_100