Connecting The Power Source - Samsung SCD60 Instruction Booklet

ENGLISH
P r e p a r i n g
Connecting a Power Source
There are two power sources that can be connected.
- Using the AC Power Adaptor and AC cord : used for indoor recording.
- Using the Battery Pack : used for outdoor recording.
To use the AC Power Adaptor and DC Cable
1. Connect the AC Power Adaptor to an AC cord.
2. Connect the AC cord to a wall socket.
Note - The plug and wall socket type may can be different depending
on the country you're in.
3. Connect the other end of the DC cable to the DC jack of the camcorder.
4-a. To set the camcorder to the CAMERAmode.
Hold down the tab of the power switch and turn the power switch to
the CAMERA position.
4-b. To set the camcorder to the PLAYER mode.
Hold down the tab of the power switch and turn the power switch to
the PLAYER position.
24
1
2
3
4-a
CAMERA
4-b
PLAYER