ENGLISH
Getting to Know Your Camcorder
How to use the Remote Control
Battery Installation for the Remote Control
You must insert or replace these batteries when :
- You purchase the camcorder.
- The remote control doesn't work.
Insert two AAbatteries, following the + and - markings.
Be careful not to reverse the polarity of the battery.
Self Record using the Remote Control
The Self Timer function on the remote control enables you to start and stop recording automatically.
Example : Scene with all members of your family
Two options are available
- WAIT-10S/SELF-30S : 10 second wait, followed by 30 seconds of recording.
- WAIT-10S/SELF-END : 10 second wait, followed by recording until you press the START/STOP button again.
1. Set the camcorder to CAMERA mode.
2. Press the SELF TIMER button until the appropriate indicator is displayed
WAIT-10S/SELF-30S
WAIT-10S/SELF-END
3. Press the START/STOP button to start the timer.
: After a 10 second wait, recording starts.
: If you have selected SELF-30S, recording stops automatically after 30 seconds.
: If you have selected SELF-END, press START/STOP again when you wish to stop recording.
Note
- When recording with the timer, you can press START/STOP a second time to cancel the function.
22
SELF
TIMER
in
the viewfinder :