Table of Contents
Advertisement
CBR450| USER MANUAL Firmware ver. 3.3.0
CRADLEPOINT
8.1.7
GPS
If you have an attached device with GPS support, you can enable a graphical view of your router's location which will
appear in Status → GPS Status.
Users can configure GPS NMEA GGA format
sentence reporting, available through a router-
based server and/or a remote server.
NOTE: Some carriers disable GPS support in otherwise
supported modems. If you encounter issues with obtaining a
fix, contact your carrier and ensure that GPS is supported.
Enable GPS support: Enables support for
querying GPS information from supported
modems.
Enable GPS server on WAN: Enables a
TCP server on the WAN side of the firewall,
which will periodically send GPS NMEA
sentences to connected clients.
Enable GPS server on LAN: Enables a TCP server on the LAN side of the firewall, which will periodically send
GPS NMEA sentences to connected clients.
o GPS server port number
Enable GPS reporting to remote server: Enables periodic reporting of GPS NMEA sentences to a remote server.
The router will buffer NMEA data if errors are encountered or if the internet connection goes down and send the
buffered sentences when the connection is restored.
o Remote server hostname or IP
o Remote server port
o Report only over specific time interval: Restricts the NMEA sentence reporting to a remote server to a
specific time interval.
The following GPS spec is copied from
© 2011 CRADLEPOINT, INC.
http://aprs.gids.nl/nmea/
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 103
Advertisement
Table of Contents
