Download Print this page

Lightolier Lytecaster 400MRX Specification

Recessed downlight power pack

Advertisement

Quick Links

POWER PACK
400MRX
Features
Power Pack : Ideal for remodeling. Integral junction box with snap-off
covers permits wiring from below.
Socket : Porcelain body ; Two-pin (GX5.3 base) Pre-wired with 18 ga. Teflon
250º leads to junction box.
Transformer : 75VA Magnetic, 120 volt primary, nominal 12 volt secondary,
class "H".
Thermal Protector : Meets CSA/UL requirements. Insulation, if used, must
be kept 3" (76mm) away from luminaire sides and junction box.
Branch Wiring : Certified for branch circuit wiring ; 4 x 14ga min.90º C supply
conductors.
WE RESERVE THE RIGHT TO CHANGE DETAILS OF DESIGN, MATERIALS AND FINISH, IN ANY WAY
THAT WILL NOT ALTER INSTALLED APPEARANCE OR REDUCE FUNCTION AND PERFORMANCE.
Lightolier CFI, 3015 Louis Amos Lachine, (Quebec) H8T 1C4
4 3/4" (121mm) aperture
Low Voltage MR16 12V
Remodeler (Non-IC)
Complete fixture consists of Reflector Trim & Power Pack. Select each separately
CUT-OUT
4 3/4" (121mm)
Lytecaster
Recessed Downlight
REFLECTOR TRIM
Accepts all 4 3/4" (121mm) Low Voltage MR16 trims 400 series: see
Reflector Trim specification sheets.
Labels : CSA , UL
Damp or Wet location rated depending on trim used.
03-03
400MRX

Advertisement

loading