Table of Contents
Advertisement
High temperatures
are generated
when the lamp is lit, so do not place
objects in front of the lens.
Q
E Be careful in handling the power cord.
Do not scratch, damage or process the power
. If the cord is damaged (core wire is
cord. Do not bend it forcibly. Also do not put a
exposed, disconnected,
etc.), ask
heavy object on it, do not heat it and do not pull
your dealer to replace it. It may
A
1
it. If you do, the power cord maybe damaged and
cause a fire, electric shock, etc.
it may cause afire, electric shock, etc.
Check that no dirt adheres to the
- Do not pull the cord.
. Do not put a heavy object on it.
power plug and fully insert without any play. If
dirt adheres or the connection
is incomplete,
it
. Do not damage the cord.
m
may cause a fire, electric shock, etc.
. Do not put it near a heating
. The outer shield of Dower cord must be
device.
.
connected to ground.
. Be careful that this unit is not placed
If you do not, it may cause a
on the power cord. The power cord maybe
damaged and it may cause a fire, electric shock,
electric shock.
etc. If the cord is covered with a carpet, etc. a
heavy object may be put on it without your
realizing it.
Do not stare directly into the laser aperture.
The laser pointer on the remote control unit radiates the laser beam from the laser
aperture.
Do not stare ink the laser aperture or radiate the laser beam to other persons as the
laser emitted is a class 2 lasef and it could damage you vision , etc.
Especially
pay attention if children are present.
. The three labels below are caution labels for the laser beam.
\
~
DO NOT STARE
INTO BEAM
CLASS 2 LASER
PRODUCT
WAVE LENGTH : 67onm
MAX. OUTPUT:
lmW
IEC60S2E-1 : 19S3 + Al
1997
LASER APERTURE
E ---
5
Advertisement
Table of Contents
