Table of Contents
Advertisement
Installation
I Example of the projector and screen installation I
J
I
Determine
picture size and projection
distance as illustrated
below.
View from the top
Screen
View from the side
b
Lens center
a
I
Screen (inch)
k%k
I
1
t
40
64
I
84
60
97
127
80
130
169
100
163
213
120
196
256
150
244
319
200
326
—
a:Distance from the projector to the screen.
(tolerance : *1 O%)
This screen size is full-screen size.(1024 dots X 768 dots)
Installation
of liquid crystal projector
d
Please basically use liquid crystal projector at the horizontal
position.
If you use liquid crystal projector by the lens up position, the lens
down position and the side up position, this may cause the heat
inside to build up and become the cause of damage.
Be especially careful not to install it with ventilation holes blocked.
I How to use foot adjusters I
7
I
idjust the projection
position using the foot adjusters at the bottom of the projector.
(
View from the front
)
Foot
Vertical
adjustments
can be made in
the
range of Oto90.
c View from the side )
u
a'
Horizontal
inclination
2
may be adjusted
using
the adjuster
at the rear.
1. Lift up the projector and press the button of the adjuster to release the lock.
2. Adjust the projection
angle, release the button of the adjuster and securely lock it.
3. To adjust the angle slightly, revolve the foot adjusters.
E@il
Do not unlock the foot adjusters while you do not support the projector, to avoid falling of
the projector and causing an injury.
. Do not revolve the foot adjusters by force, the foot adjusters is damaged.
. Securely lock the adjuster.
. Do not apply unnecessary
force from the upper side when lifting the projector.
Otherwise,
projector may be damaged or a finger could be caught and cause injury.
,
12
Advertisement
Table of Contents
